亚洲一区二区三区字幕-麻豆精品一区二区三-一区二区三区一级av-午夜福利视频一区二-亚洲人妻av免费在线

意大利PAVONE重量變送器DAT400

    長期優惠供應意大利pavone sistemi(帕瓦內)稱重儀器儀表  稱重數字儀表  dat 400  dat 450  dat-s 400  dat 500  gateway 300 comunicator  lc 100  mc  102  mcs 102  mc 302  mc s 302  uwt 600  uwt 600i i box…

Pavone Sistemi MC 302稱重儀表

意大利Pavone Sistemi MC 302稱重儀表技術特點： - Fulfills various needs in the field of weighing, from simple level setpoint to complicated batching procedures - 24-bit A/D converter - Fiscal memory up to 160.000 weighings - Totalisation of dosed weights ac……

Pavone Sistemi CGS4-C接線盒

意大利Pavone Sistemi CGS4-C接線盒技術特點： - Aluminium case or Stainless steel case - Temperature range: -10~50 ℃ - Storage temperature:-20~+70℃ - Electrical connection:Terminal screw pass 5mm - Protect class IP66 - Connector for rapid connection to 100……

Pavone Sistemi UWT 600稱重變送器

意大利Pavone Sistemi UWT 600稱重變送器技術指標： Trasducer input voltage: 5 V (max 6 load cells 350 Ohm) Measuring range: -1.5 ÷ +3.5 mV/V Input sensitivity: 0.02 �0�8V/ per count ……

Pavone Sistemi DAT 400稱重變送器

意大利Pavone Sistemi DAT 400稱重變送器技術參數： Trasducer input voltage: 5 V (max 6 load cells 350 Ohm) Measuring range: -0.5 ÷ +3.5 mV/V (-3.9 ÷ +3.9 mV/V optional) Input sensitivity: 0.02 m……

Pavone Sistemi DAT 500稱重變送器

意大利Pavone Sistemi DAT 500稱重變送器性能特點：

Trasducer input voltage:	5 V (max 6 load cells 350  Ohm)
Measuring range:	-0.5÷+3..5 mV/V (-3.9÷+3.9 mV/V optional)
Input sensitivity:	0.02 µV/ per count
Linearity:	<0.01% of full scale
Gain drift:	<0.001% full scale/ °C
Display:	6 digit, red LED (7 segments), h 14 mm
LED status:	4 red
A/D Converter:	24 bit
Resolution:	> 16.000.000 counts
Visible resolution:	60.000 divisions displayable on net weight
Divisions value (adjustable):	x1, x2, x5
Set decimal:	0.0 ; 0.00 ; 0.000
Filter:	0.1 ÷ 25 Hz adjustable
Keyboard:	4 tactile feedback buttons
Tool voltage:	24 V c.c. ±15% - power 5 W
Temperature range:	-10 ÷ +50 °C
Storage temperature:	-20 ÷ +70 °C
Logic output:	2 relays (clean contact) MAX 24 V c.c./100 mA cad.
Logic input:	2 optoisolated 24 V c.c. PNP (External voltage)
Serial door:	USB, RS232C or RS422/RS485 with ASCII or Modbus RTU protocols
Transmission distance:	15m (RS232C), 1000m (RS422 e RS485)
FIELDBUS protocol:	PROFIBUS, DEVICENET (opzional)
Others fieldbus comunication:	CANopen, Modbus-Plus, Ethernet and other
Peak Hold function:	for dynamic measures
Baud rate:	2400, 9600, 19200, 38400, 115200 adjustable
Analogic optional output:	optoisolated 16 Bit Tension: 0÷5/10V (R min10 K Ohm) Current: 0/4÷20mA (R max 300 Ohm)
Regulatory compliance:	EN61326-1, EN55011 and EN55014 for EMC; EN61010-1 for electrical security
Electrical connection:	Terminal screw pass 5 mm
Dimensions and weight:	96 x 48 x 120 mm (L x H x D); 250 g
Drilling template:	92 x 45 mm (L x H)
BCD output:	optional

Trasducer input voltage:	5 V (max 6 load cells 350  Ohm)
Measuring range:	-0.5÷+3..5 mV/V (-3.9÷+3.9 mV/V optional)
Input sensitivity:	0.02 µV/ per count
Linearity:	<0.01% of full scale
Gain drift:	<0.001% full scale/ °C
Display:	6 digit, red LED (7 segments), h 14 mm
LED status:	4 red
A/D Converter:	24 bit
Resolution:	> 16.000.000 counts
Visible resolution:	60.000 divisions displayable on net weight
Divisions value (adjustable):	x1, x2, x5
Set decimal:	0.0 ; 0.00 ; 0.000
Filter:	0.1 ÷ 25 Hz adjustable
Keyboard:	4 tactile feedback buttons
Tool voltage:	24 V c.c. ±15% - power 5 W
Temperature range:	-10 ÷ +50 °C
Storage temperature:	-20 ÷ +70 °C
Logic output:	2 relays (clean contact) MAX 24 V c.c./100 mA cad.
Logic input:	2 optoisolated 24 V c.c. PNP (External voltage)
Serial door:	USB, RS232C or RS422/RS485 with ASCII or Modbus RTU protocols
Transmission distance:	15m (RS232C), 1000m (RS422 e RS485)
FIELDBUS protocol:	PROFIBUS, DEVICENET (opzional)
Others fieldbus comunication:	CANopen, Modbus-Plus, Ethernet and other
Peak Hold function:	for dynamic measures
Baud rate:	2400, 9600, 19200, 38400, 115200 adjustable
Analogic optional output:	optoisolated 16 Bit Tension: 0÷5/10V (R min10 K Ohm) Current: 0/4÷20mA (R max 300 Ohm)
Regulatory compliance:	EN61326-1, EN55011 and EN55014 for EMC; EN61010-1 for electrical security
Electrical connection:	Terminal screw pass 5 mm
Dimensions and weight:	96 x 48 x 120 mm (L x H x D); 250 g
Drilling template:	92 x 45 mm (L x H)
BCD output:	optional